Preparing baby formula https://www.malysh.ua/shop/molochni-sumishi/ is an important process that requires accuracy and compliance with safety rules. Improper preparation or storage of the formula can lead to the loss of its nutritional properties or even cause health problems for the baby. Therefore, it is important for parents to know how to properly prepare the formula, follow hygiene standards and manufacturer’s recommendations to provide the child with safe and healthy nutrition.
Hygiene and safety tips
- Wash your hands before preparing . Before you start preparing the formula, wash your hands thoroughly with soap. This will help prevent bacteria from getting into your baby’s food.
- Sterilize bottles and nipples . Sterilizing bottles, nipples, and other feeding utensils is very important, especially in the first months of your baby’s life. This can be done using special sterilizers or simply by boiling them in water for 5-10 minutes.
- Use quality water . The water you use to prepare the formula should be clean and of safe origin. It is advisable to use special baby water or boiled water to avoid possible contamination.
- Watch the water temperature . To prepare the mixture, the water should be warm (approximately 37 °C), as too hot water can destroy the beneficial substances, and cold water can dissolve the powder poorly. After boiling, the water should be cooled to a comfortable temperature.
- Follow the manufacturer’s recommendations . Each package of formula contains instructions for the correct dosage. It is very important to follow these recommendations, as a solution that is too thick or too thin can cause digestive problems for the baby.
Instructions for preparing and storing the mixture
Step 1: Prepare the tools
Make sure all the tools you need to prepare the formula are ready to use. To do this, thoroughly wash and sterilize the bottles, nipples, and caps. After sterilization, let them dry or use a clean towel to remove any remaining water.
Step 2: Water preparation
Boil the water and let it cool to about 37°C so that it is comfortable for your baby. Pour the right amount of water into the bottle, following the instructions on the formula packaging.
Step 3: Adding the mixture
Using the measuring spoon that usually comes with the mixture package, measure the required amount of powder and add it to the water. It is important that the powder is measured evenly, without a hill, as this affects the concentration of the mixture.
Step 4: Mixing
Close the bottle and shake it well to dissolve the mixture completely, without lumps. Test the temperature by putting a few drops on the inside of your wrist – it should be pleasantly warm, but not hot.
Step 5: Storing the mixture
The mixture you have prepared should be used within an hour. If the baby has not finished the mixture, it is better to pour out the rest, as bacteria can multiply in it under the influence of external factors. The finished mixture should not be left “for later” or reheated, as this can reduce its nutritional value and pose a risk to the baby’s health.
Additional tips for storing dry mix
- Store the package in a dry place . The dry mix should be stored in a cool and dry place, away from sunlight and moisture. This helps maintain the freshness of the product.
- Close the package after use . After each use, carefully close the mixture package to prevent moisture, dirt, or foreign objects from entering.
- Use within the recommended period . The packaging always states how long the mixture can be used. Using the mixture after the expiration date can be dangerous for the baby.
- Do not freeze the mixture or store it in the refrigerator . The dry mixture is not intended to be stored in the refrigerator or freezer as this may affect its structure and make it unusable.
Following these simple recommendations will help provide your baby with safe and high-quality nutrition.