A coffee machine is a complex device consisting of many mechanical units, electronic modules and hydraulic systems. Like any other equipment, it can periodically break down for various reasons. Usually, this happens at the most unexpected and unwanted moment. It is especially unpleasant if the breakdown occurs at the beginning or in the middle of the working day in a coffee shop. Then the establishment cannot work fully and loses customers. Therefore, it is important to always have the contacts of someone who understands this equipment at hand.
Coffee machine repair in Kyiv is a popular service, because coffee shops are now considered cult establishments and have many visitors throughout the day. Often, a cup of aromatic, invigorating drink is also ordered by visitors to restaurants and coffee shops. Therefore, repairs, regardless of the nature of the breakdown, should be carried out as quickly as possible. There are several common faults that often happen with any coffee machines. Keep in mind that even the most expensive equipment is not completely insured against breakdowns.
What to do if water is leaking from under the horn
First, pay attention to the sealing ring. Over time, it gets clogged with fatty deposits and may start leaking. Then it is enough to wash the ring and the place where it is installed. The seal itself may crack or become less elastic. Ideally, it should be pulled out without much effort. It is enough to twist it a little from the side with a screwdriver and pull it out. Sometimes you also need to unscrew the mesh that secures the seal.
If the problem is in the deposition of fats and salts, then it is necessary to clean the entire machine with mandatory descaling. A damaged or torn seal must be replaced. Also make sure that the filter is clean and does not contain foreign particles. Otherwise, after switching on the device may start leaking again.
A thin stream from a nozzle or horn, accompanied by an incomprehensible whistling or hissing sound
This often happens because the horn or filter is clogged with coffee powder grains or scale. The best way to get rid of the latter is by descaling. The strainer is washed manually from grains using a hard brush. A regular toothpick will help to clean all the holes and tubes. It would not hurt to use a special product against coffee fats. It is also worth checking the grind size.
You can choose coffee for yourself or a coffee shop on the Gemini website .